Connecting the am (mw)/lw aerial, Connecting the fm aerial – Инструкция по эксплуатации Samsung MM-ZJ8
Страница 3
GB
9
The AM aerial (for long and medium waves) can be:
Placed on a stable surface
Fixed to the wall (you must first remove the base)
The
AM aerial connector terminals are located on the rear of the system and are marked AM ANT.
To avoid noise interference, check that the loudspeaker wires do not run close to the
aerial wires.
Always keep them at least 2 inches (5 cm) away.
Connecting the AM (MW)/LW Aerial
How to connect a COAXIAL TYPE aerial.
Connect a 75
Ω
antenna to the
FM antenna terminal.
Plug the connector on the
FM aerial supplied into the coaxial socket (75
Ω
) marked
FM on the rear of the system.
Follow the instructions given on Page 15 to tune into a radio station, and determine the best position for the aerial.
If reception is poor, you may need to install an outdoor aerial.
To do so, connect an outdoor
FM aerial to the FM socket on the rear of the system using a 75
Ω
coaxial cable (not supplied).
Connecting the FM Aerial
MM-ZJ8(GB) 1/18/04 11:34 Page 9