Zanussi FLS 1002 V - Инструкция (Страница 5)

ENGLISH
5
The Control Panel
1 Programme Guide
2 ON/OFF LAMP
It lights when the appliance is operating.
3 Rinse Hold button
Pressing this button the water will hold up in the wash
tub at the end of the cycle. Press again to drain the water
and take out the clothes.
4 Half load button
Pressing this button before starting the intense program
there will be one rinse less which leads to energy and
water saving.
5 Spin speed selector
This dial allows you to select the spin speed depending
on the laundry.
For cotton the dial can be adjusted from 300 to 1000
rpm with several speed possibilities between.
For synthetic, delicates and wool the 1000 rpm speed on
the dial correspond to 750 rpm.
When the dial is on position the spinning phases are
annuled.
0
6 TEMPERATURE SELECTOR
This control allows you to select the temperature of the
washing cycle in accordance with the kind of clothes to
be washed.
To select the required temperature turn the control until
the marker on the top coincides with the required
temperature (reference mark on the control panel).
On the program chart you will find the most appropriate
temperature for each kind of washing.
7 PROGRAM SELECTOR
To select the required program turn the control
clockwise until the marker on the top coincides with the
number of the required program (reference mark on the
control panel). If at any chance you pass by the required
number NEVER TURN THE CONTROL
ANTICLOCKWISE
just continue clockwise until the
required number is reached again.