Samsung LE46A956D1M - Инструкция (Страница 54)

English - 2
Scanning and Switching between Anynet+ Devices
1. Press the TOOLS button. Press the ENTERE button to select “Anynet+
(HDMI-CEC)”.
2. Press the ▲ or ▼ button to select “Device List”, then press the ENTERE
button
Anynet+ devices connected to the TV are listed. If you cannot find a device
you want, press the red button to scan for devices.
Only when you set “Anynet+ (HDMI-CEC)” to On in the “Setup” menu, the
“Device List” menu appears.
3. Press the ▲ or ▼ button to select to a particular device and press the
ENTERE button. It is switched to the selected device.
Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching operation.
The time required to scan for devices is determined by the number of connected devices.
When the device scan is complete, the number of devices found are not displayed.
Although the TV automatically searches the device list when the TV is turned on via the power button, devices connected to
the TV when the TV is on or under some conditions are not automatically displayed in the device list. Press the red button to
search for the connected device.
If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to
switch to an Anynet+ device by using the “Device List”.
N
N
N
N
N
N
N
Setting Up Anynet+
Anynet+(HDMI-CEC)
“Tools → Anynet+(HDMI-CEC)” performs the same function.
Setup
Anynet+(HDMI-CEC) → Off / On: To use the Anynet+ Function, Anynet+
(HDMI-CEC) must be set to On.
When the “Anynet+ (HDMI-CEC)” function is disabled, all the Anynet+
related operations are deactivated.
Auto Turn Off → No / Yes: Setting an Anynet+ Device to turn Off
Automatically when the TV is Turned Off
The active source on the TV remote must be set to TV to use the
Anynet+ function.
If you set “Auto Turn Off” to “Yes”, connected external devices are also
turned off when the TV is turned off. If an external device is still recording,
it may or may not turn off.
❑

•
N
•
N
N
Application
WISELINK Pro
Anynet+ (HDMI-CEC) ►
Content Library
InfoLive
Product Guide
Device List
Setup
U Move E Enter R Return
View TV
Device List
Recording
: DVDR
DVDR Operation
Receiver
: On
Setup
U Move E Enter R Return
Anynet+ (HDMI-CEC) : ON
Auto Turn Off : Yes
U Move E Enter R Return
Set up
Off
On
BN68-01737F-ENG.indb 52 2008-09-02 ¿АИД 4:32:48