Olympus VN-5500 - Инструкция (Страница 7)

10
EN
1 Select the file you want to transfer,
and press the PLAY (
`) button to
play it.
2 While the recorder is during play-
back mode, press and hold the
DISP/MENU button for 1 second
or longer.
3 Press the
9 or 0 button to
select a destination folder.
4 Press the PLAY (
`) button.
• The destination folder and the
number of the moved file appear
on the display, and moving is
completed.
• If the destination folder is full
(100 files), [FULL] appears on the
display, and you cannot move the
file to that folder.
1 Destination folder
2 Destination number of the file
(Fig. f)
Index Marks (Fig. g)
Index marks can be placed in a file
during recording or playback to provide
a quick and easy way of keeping track of
important sections in the file.
1 While the recorder is during re-
cording (pause recording) mode or
playback mode, press and hold the
FOLDER/INDEX button to set an
index mark.
• An index number appears on the
display.
Clearing an Index Mark:
While the index number appears on the
display, press the ERASE (
s
) button.
• Up to 10 index marks can be set in a
file.
• Sequential index marks numbers
are reassigned automatically.
Resetting the Recorder [CLEAR]
(Fig. h)
This function resets the current time
and other settings to their initial
status. It is useful if you are having
problems with the recorder, or if you
want to erase the entire memory of
the recorder.
1 Press and hold the STOP ( 4) button
and the ERASE (
s
) button for 3
seconds or longer.
2 Press the
9 or 0 button to
select [YES].
3 Press the PLAY (
`) button.
• I f y o u l e a v e t h e r e c o r d e r
untouched for 8 seconds or longer
before you press the PLAY (
`)
button in Step 3, Clear mode will
be canceled, and the recorder will
enter Stop mode.
General Precautions
Read this manual carefully to ensure
that you know how to operate it safely
and correctly. Keep this manual in an
easily accessible location for future
reference.
• The warning s ymbols indicate
important safety related information.
To protec t yourself and others
from personal injury or damage
to property, it is essential that you
always read the warnings and
information provided.
Warning regarding data loss:
• Recorded content in memory may
be destroyed or erased by operating
mistakes, unit malfunction, or during
repair work.
• For important recorded content, we
recommend you to write it down
some where.
• Any liability for passive damages or
damage of any kind occurred due to
data loss incurred by a defect of the
product, repair performed by the
third party other than Olympus or an
Olympus authorized service station,
or any other reasons is excluded
from Olympus’s liability.
For safe and correct Usage
• Be sure to stop the recorder before
replacing the battery.
• Do not leave the recorder in hot,
humid locations such as inside a
closed automobile under direct
sunlight or on the beach in the
summer.
• Do not store the recorder in places
exposed to excessive moisture or
dust.
• Do not use organic solvents such as
alcohol and lacquer thinner to clean
the unit.
• Do not place the recorder on top of
or near electric appliances such as
TVs or refrigerators.
• Avoid sand or dirt. These can cause
irreparable damage.
• Avoid strong vibrations or shocks.
• Do not disassemble, repair or modify
the unit yourself.
• Do not op erate the unit while
op erating a vehicle (such as a
bicycle, motorcycle, or go-cart).
• Keep the unit out of the reach of
children.
Batteries
V Warning:
• Batteries should never be exposed
to fl ame, heated, short-circuited or
disassembled.
• D o n o t a t t e m p t t o r e c h a r g e
alkaline, lithium or any other non-
rechargeable batteries.
• Never use any battery with a torn or
cracked outer cover.
• Keep batteries out of the reach of
children.
• If you notice anything unusual when
using this product such as abnormal
noise, heat, smoke, or a burning
odor:
1 remove the batteries immediately
while being careful not to burn
yourself, and;
2 call your dealer or local Olympus
representative for servicing.
Troubleshooting
Q1: Nothing happens when a button
is pressed.
A1: The HOLD switch may be set to
[HOLD] position.
The batteries may be depleted.
The batteries may be inserted
incorrectly.
Q2: No sound or quiet sound is heard
from the speaker while playing
back.
A2: T h e e a r p h o n e p l u g m ay b e
plugged into the recorder.
The volume may be set to the
minimum level.
Q3: Recording is not possible.
A3: By pressing the STOP (
4) button
repeatedly while the recorder
stops, check if the display shows:
• The remaining recording time
in the selected folder may have
reached [00:00].
• The number of fi les is 100.
Check if the display shows [FULL] by
pressing the REC (
s) button.
Q4: The playback speed is too fast
(slow).
A4: The recorder may be set to fast
(slow) Playback.