Getting started, Resetting the unit, Detaching the front panel – Инструкция по эксплуатации Sony XR-CA360EE

Страница 6: Setting the clock

Advertising
background image

6

6

Attaching the front panel

Attach part A of the front panel to part B of
the unit as illustrated and push the left side
into position until it clicks.

Notes
• Be sure not to attach the front panel upside

down.

• Do not press the front panel too hard against the

unit when attaching it.

• Do not press too hard or put excessive pressure

on the display window of the front panel.

• Do not expose the front panel to direct sunlight

or heat sources such as hot air ducts, and do not
leave it in a humid place. Never leave it on the
dashboard of a car parked in direct sunlight or
where there may be a considerable rise in
temperature.

Caution alarm

If you turn the car ignition off without
removing the front panel, the caution alarm
will beep for a few seconds.
If you connect an optional power amplifier and
do not use the built-in amplifier, the beep
sound will be deactivated.

Getting Started

Resetting the unit

Before operating the unit for the first time, or
after replacing the car battery or changing the
connections, you must reset the unit.
Remove the front panel and press the RESET
button with a pointed object, such as a
ballpoint pen.

Note
Pressing the RESET button will erase the clock
setting and some memorised functions.

Detaching the front panel

You can detach the front panel of this unit to
protect the unit from being stolen.

1

Press (OFF).

2

Press (RELEASE), then slide the front
panel a little to the left, and pull it off
towards you.

Notes
• Be sure not to drop the panel when detaching it

from the unit.

If you detach the panel while the unit is still

turned on, the power will turn off automatically
to prevent the speakers from being damaged.

When carrying the front panel with you, use the

supplied front panel case.

RESET button

(OFF)

(RELEASE)

A

B

Advertising