Инструкция по эксплуатации ASSISTANT AH-1026 green

Led alarm clock

Advertising

O W N E R ’ S M A N U A L

– 1 –

– 2 –

– 3 –

– 4 –

– 5 –

– 7 –

ENGLISH

– 6 –

ENGLISH

– 8 –

ENGLISH

LED ALARM CLOCK

Model AH-1026

Warranty period

Гарантийный срок

Date of sale

Дата продажи

Model

Номер модели

Stamp

Печать магазина

ALARM

1. ALARM

indicator

2. [SNOOZE] button
3. [HOUR] set button
4. [MINUTE] set button
5. [TIME] set button
6. [ALARM] set button
7. [ALARM ON/OFF] switch

TO OPERATE CLOCK

BLINKING DISPLAY/ALARM

ON INDICATOR

When the clock is plugged in, the display will

blink on and off meaning the incorrect time is being
displayed. You should always check the time when
this is indicated. When the Alarm Indicator is on,
the alarm will sound at the time set.

SET TIME

Press and hold the [TIME] and [HOUR] button

until the correct hour is displayed, then release the
[HOUR] button and press the [MINUTE] button until
the correct minute is displayed.

SET ALARM

Press and hold the [ALARM] button and the

[HOUR] button or [MINUTE] button as above.

TO OPERATE ALARM

Slide the [ALARM ON/OFF] switch to ON posi-

tion. The alarm will sound at the time set. To shut
off the alarm, slide the [Alarm ON/OFF] switch to
OFF position.

SNOOZE

Press case top for snooze and get an extra 8~9

minutes of sleep. This can be repeated up to six
times within one hour.

BATTERY BACK UP

Insert one 9V battery into the battery compart-

ment on the back-side of the clock. The battery
will hold the ALARM and TIME settings until power
is restored. If there is no battery and the power is
interrupted, the display will flash and the ALARM
and the TIME will need to be reset.

MAINTENANCE

A soft cloth or a paper towel may be used to clean

your clock. Do not use any corrosive cleanser or
chemical solutions on the clock. Keep the clock
clean and dry to avoid any problems. Do not expose
this appliance to dripping or splashing water.

SAFETY INSTRUCTIONS

The apparatus should not be exposed to dripping

or splashing. No objects filled with liquids, such as
vases, shall be placed on the apparatus.

Ventilation–The appliance should be situated so

that its location or position does not interfere with
its proper ventilation. For example, the appliance
should not be placed on a bed, sofa, rug, or similar
surface that may block the ventilation openings; or,
placed in a built-in installation, such as a bookcase
or cabinet that may impede the flow of air through
the ventilation openings.

The appliance should be situated away from

heat sources such as radiators, heat registers,
stoves, or other appliance (including amplifiers)
that produce heat.

Power-Cord Protection–Power supply cords

should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them, paying particular attention to cords
at plugs, convenience receptacles, and the point
where they exit from the appliance.

Disconnect from mains supply when not in use.
To avoid the risk of electric shock, do not remove

the cover of the apparatus. There are no user ser-
viceable parts inside.

Do not operate this product if the mains lead is

damaged.

The mains lead must be replaced by the manu-

facturer or its appointed agent.

Please read the instruction manual before use

and retain for future reference.

The rating label is on the unit's bottom.
During electro static discharge, the product may

auto reset then adjust the mode to return normal
operation. the apparatus shall not be exposed to
dripping or splashing and that no objects filled
with liquids, such as vases, shallbe placed on the
pparatus.

Where the mains plug is used as the disconnect

device,such disconnect device shall remain read-
ily operable.

Advertising