Zanussi ZBB47460DA - Инструкция (Страница 5)

Important! Difference between the
temperature displayed and temperature setting
is normal. Especially when:
• a new setting has recently been selected.
• the door has been left open for a long time.
• warm food has been placed in the compart-
ment.
Excessive temperature alarm
In the event of an abnormal temperature rise in-
side the freezer (e.g. power cut) Alarm light will
start to flash and a buzzer will sound.
After the temperature has returned to normal,
the Alarm light will continue to flash, although
the buzzer has stopped.
When the Alarm reset switch is pressed, the
warmest temperature reached in the compart-
ment flashes on the Temperature indicator .
If the power has been off for a long time, frozen
food should be consumed as quickly as possi-
ble, or cooked and then re-frozen.
Action Freeze function
You can activate the Action Freeze function by
pressing the Action Freeze switch.
The Action Freeze light will light up.
When this function is on, SP is shown on the
dispay .
Important! This function stops automatically
after 52 hours.
It is possible to deactivate the function at any
time by pressing Action Freeze switch. The Ac-
tion Freeze light will switch off.
Fridge Control panel
1 2 3 5 6 7 4
1. Pilot light
2. ON/OFF switch
3. Temperature regulator (warmest)
4. Temperature indicator
5. Temperature regulator (coldest)
6. Action Cool light
7. Action Cool switch
Switching on
Insert the plug into the wall socket.
Press the ON/OFF switch .
The Pilot Light will light up.
Switching off
The fridge is shut off by pressing the ON/OFF
switch until the Pilot light and the Temperature
indicator switched off.
Temperature regulation
The temperature can be adjusted between
+2°C and +8°C.
By pressing the Temperature regulators, the
current temperature setting flashes on the Tem-
perature indicator. It is possible to modify the
setting temperature only with flashed indicator.
To set a warmer temperature, press warmest
Temperature regulator. To set a colder temper-
ature, press coldest Temperature regulator. The
Temperature indicator displays the newly selec-
ted temperature for a few seconds and then
shows again the inside compartment tempera-
ture.
The newly selected-temperature must be
reached after 24 hours.
Caution! During the stability period by the
first starting the temperature displayed can
not correspond to the setting temperature.
During this time it is possible that the
temperature displayed is lower than the setting
temperature.
Temperature indicator
During normal functioning the Temperature in-
dicator shows the temperature inside the fridge.
5
www.zanussi.com