Installation – Инструкция по эксплуатации CHIEF MTM Series

Страница 6

Advertising
background image

MSM/MTM Series

Installation Instructions

6

INSTALLATION

The MSM/MTM mounts are designed to be mounted to an 8"
concrete, 8"x8"x16" concrete block or 2" x 4" wood studs (16"
on center) wall. The MTM has brackets which allow the TV to be
tilted. The MSM has static brackets which keep the TV in an
upright position.

Locate Mounting Site

WARNING:

IMPROPER INSTALLATION CAN LEAD TO

MOUNT FALLING CAUSING SEVERE PERSONAL INJURY
OR DAMAGE TO EQUIPMENT! It is the installers
responsibility to make certain the structure to which the
mount is being attached is capable of supporting five times
the weight of the MTM or MSM and all attached equipment
not to exceed 125 lbs (56.7 kg) for dual stud attachment, and
75 lbs (34.0 kg) for single stud attachment.

NOTE:

Proceed to either the Installing to a Wood Stud Wall
section or the Installing to a Concrete Wall section.

Installing to a Wood Stud Wall

1.

Determine the center of the TV screen, and where it should

be located on the wall.

2.

Locate the closest stud to the left and right of the selected

location.

NOTE:

If the screen area lies over a stud, use that stud if using

the single stud installation method.

NOTE:

Use that stud and the stud to either the left or right of it
if using the dual stud installation method.

3.

Line up the notches on mount with center of screen marking

to determine vertical center. (See Figure 1)

Figure 1

4.

Measure up 7-1/2" (190.5mm) from the center point to mark

location of the upper mounting slots.

5.

Using a level, mark the wall on each stud to attach the

mount through the upper mounting slots. (See Figure 2)

NOTE:

The MSM and MTM may be attached through the

mounting slots on dual studs, or through the center
mounting holes on a single stud. (See Figure 2)

Figure 2

WARNING:

ELECTRICAL SHOCK HAZARD! CUTTING

OR DRILLING INTO ELECTRICAL CORDS OR CABLES
CAN CAUSE DEATH OR SERIOUS PERSONAL INJURY!
ALWAYS make certain area behind mounting surface is free
of electrical wires and cables before drilling or installing
fasteners.

Center of screen

7-1/2"

Vertical center

of mount

[190.5mm]

5

5

Single Stud
Installation

Dual Stud

Installation

Advertising
Эта инструкция подходит к следующим моделям: