Tile v position (command: d f), Tile h size (command: d g), Tile v size (command: d h) – Инструкция по эксплуатации HP Рекламно-информационный интерактивный монитор HP LD4245tm 4192 inch с LED-подсветкой

Страница 117

Advertising
background image

* This function is available only when the Natural option of the Tile Mode is set to Off while the Tile

Mode set to On.
Transmission
[d][e][ ][Set ID][ ][Data][Cr]
Data
00 to 20 (00H - 14H)
*Left/Right values depend on Tile H size.
** It may not be supported depending on the model.
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data][x]

29. Tile V Position (Command: d f)

To adjust the Tile Vertical position.
* This function is available only when the Natural option of the Tile Mode is set to Off while the Tile

Mode set to On.
Transmission
[d][f][ ][Set ID][ ][Data][Cr]
Data
0 to 20 (00H - 14H)
* Bottom/Top values depend on Tile Vertical size.
** It may not be supported depending on the model.
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]

30. Tile H Size (Command: d g)

To adjust the Tile Horizontal size.
*Set Tile H Position to 0x32 before setting Tile H Size.
* This function is available only when the Natural option of the Tile Mode is set to Off while the Tile

Mode set to On.
Transmission
[d][g][ ][Set ID][ ][Data][Cr]
Data
0 to 50 (00H - 32H)
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]

31. Tile V Size (Command: d h)

To adjust the Tile Vertical size.

Transmission / Receiving protocol 107

Advertising