Switching between anynet, Devices, Anynet – Инструкция по эксплуатации Samsung PS58B850Y1W
Страница 56: Menu
English - 56
Switching between Anynet
+
Devices
1. Press the TOOLS button. Press the ENTERE button to select Anynet
+
(HDMI-CEC).
. Press the ▲ or ▼ button to select Device List, then press the ENTERE button.
Anynet+ devices connected to the TV are listed. If you cannot find a device you
want, press the red button to scan for devices.
Only when you set
Anynet
+
(HDMI-CEC) to On in the Setup menu, the Device List
menu appears.
3. Press the ▲ or ▼ button to select to a particular device and press the ENTERE
button. It is switched to the selected device.
Switching to the selected devices may take up to 2 minutes. You cannot cancel the
operation during the switching operation.
The time required to scan for devices is determined by the number of connected devices.
If you have selected external input mode by pressing the
SOURCE button, you cannot use the Anynet+ function. Make sure to
switch to an Anynet
+
device by using the
TOOLS button.
Anynet
+
Menu
The
Anynet
+
menu changes depending on the type and status of the Anynet
+
devices connected to the TV.
Anynet
+
Menu
Description
View TV
Anynet
+
mode changes to TV broadcast mode.
Device List
Shows the Anynet+ device list.
(device_name) MENU
Shows the connected device menus. E.g.
If a DVD recorder is connected, the disc menu of the DVD recorder will appear.
(device_name) INFO
Shows the play menu of the connected device. E.g.
If a DVD recorder is connected, the play menu of the DVD recorder will appear.
Recording: (*recorder)
Starts recording immediately using the recorder.
(This is only available for devices that support the recording function.)
(*recorder) Reserve Recording
Enables reserving a recording for the recorder.
(This is only available for devices that support the recording reservation function.)
Stop Recording: (*recorder)
Stops recording.
Receiver
Sound is played through the receiver.
TV Remote Control Buttons Available in Anynet+ Mode
Device Type
Operating Status
Available Buttons
Anynet+ Device
After switching to the device, when the
menu of the corresponding device is
displayed on the screen.
Numeric buttons
▲/▼/◄/►/
ENTERE buttons
Colour buttons /
EXIT button
After switching to the device, while
playing a file
(Backward search) /
(Forward search)
(Stop) /
(Play) /
(Pause)
Device with
built in Tuner
After switching to the device, when you
are watching a TV programme
P
/
button
Audio Device
When Receiver is activated
=
/ button
M
MUTE button
The Anynet+ function only works when the active source on the TV remote control is set to TV.
The
button works only while in the recordable state.
You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet+ devices only using the TV remote control.
The TV remote control may not work under certain conditions. In this case, reselect the Anynet+ device.
The Anynet+ functions do not operate with other manufacturers’ products.
The
,
operations may differ depending on the device.
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is connected, it
will be represented as (*device_name).
N
N
N
N
N
❑
❑
N
N
N
N
N
N
N
U
Move
E
Enter
R
Return
View TV
Device List
Recording
: DVDR
DVDR MENU
DVDR INFO
Receiver
: On
Setup
BN68-02196D-00Eng.indb 56
2009-04-09 오후 4:21:48