Pioneer PD-F1009 - Инструкция (Страница 6)

6
CONNECTIONS
LINE OUT
OPTICAL
CONTROL DIGITAL OUT
L R IN OUT
R L
C D CONTROL
OUT
DIGITAL
OPTICAL IN
LINE OUT
OPTICAL
CONTROL DIGITAL OUT
L R IN OUT
L R
L R
Before making or changing the connections, switch off the power and disconnect the power cord from the AC outlet.
A Making connections
1 Connect the LINE OUT jacks of this unit to the input jacks (CD
or AUX) of the amplifier. Make sure that the white plugs are
connected to the left (L) jacks and the red plugs to the right (R)
jacks.
• Be sure not to connect this unit to the amplifier’s PHONO
jacks, as sound will be distorted and normal playback will not
be possible.
2 Connect the power cord to a household AC wall outlet.
• Make sure plugs are inserted fully into the wall outlet.
Note!!
If you connect the power cord to a "SWITCHED" AC outlet on an
amplifier, you will not be able to use this unit's memory function.
B Connecting the OPTICAL FIBER CABLE
CD can be played using the digital output.
This unit can be connected to an amplifier equipped with an optical
digital jack.
1. Remove the protective dust cap from this unit’s OPTICAL
DIGITAL OUT jack.
2. Use an optical fiber cable to connect the OPTICAL DIGITAL
OUT jack of this unit to the optical input jack of the amplifier.
• Align the plug of the optical fiber cable with the optical digital
jack and fully insert the plug to make a secure connection.
Use a separately sold optical fiber cable for the optical digital jack
connections.
C System remote control with a Pioneer stereo
amplifier that has the
Î mark
When a Pioneer stereo amplifier bearing the Î mark is used,
connect the CONTROL IN jack on the rear panel of the CD player
to the CONTROL OUT jack of the amplifier. This will enable the
CD player to be controlled using the remote control unit supplied
with the stereo amplifier. If you do not plan to use this feature, it is
not necessary to connect the CONTROL IN/OUT jacks.
•
The remote control unit supplied with the amplifier can be used
to control Play, Stop, Pause, Track/Disc Search and Disc
Change operations.
• For instructions regarding connections and operation, refer to
the operating instructions provided with your stereo amplifier.
Notes!!
• When a control cable is connected to the player’s CONTROL IN
jack, direct control of the player with the remote control unit is
not possible. Operate the player with the remote control unit by
aiming it at the amplifier.
• Be sure to connect both of the control cable's plugs securely to
the CONTROL IN and CONTROL OUT jacks. Do not connect
only one end of the cable.
• Be sure to turn off the power of the amplifier before connect-
ing the power cord and output cable.
• When only the digital output is connected, the remote sensor
of the amplifier does not function. To operate it, connect the
output cable to the stereo amplifier as well as connecting the
digital output.
To the CONTROL IN jack of the
Pioneer component bearing
the
Î
mark.
C
Power cord
A-2
Control cable
C
PD-F1009
Stereo amplifier
White Red
White Red
Optical fiber
cable
A-1
B
Audio cable