Great Plains Simba X-Press Operator Manual - Инструкция (Страница 4)

Культиватор X-Press
Инструкции по эксплуатации
4
Гарантии
WARRANTY
TERMS AND CONDITIONS
In this warranty Simba International Ltd., is referred to as “the Company”.
1. Subject to the provisions of this warranty the Company warrants each new machine sold by it to be sold free from any
defect in material or workmanship for a period of 12 months from date of installation with the end-user.
Some specific items have additional warranty over and above the standard 12 months. Details of these can be obtained
upon request directly from the distributor or Simba International Ltd.
2. If the machine or part thereof supplied by the Company is not in accordance with the warranty given in clause 1 the
Company will at its option:
(a) make good the machine or part thereof at the Company’s expense, or
(b) make an allowance to the purchaser against the purchase price of the machine or part thereof, or
(c) accept the return of the machine and at the buyers option either:
I) repay or allow the buyer the invoice price of the machine or part thereof, or
II) replace the machine or part thereof as is reasonably practical.
3. This warranty shall not oblige the Company to make any payment in respect of loss of profit or other consequential loss or
contingent liability of the Purchaser alleged to arise from any defect in the machine or impose any liability on the Company
other than that contained in clause 2.
4. Any claim under this warranty must be notified to the Company in writing specifying the matters complained of within 14
days from the date of repair.
5. Any claim under this warranty must be made by the original purchaser of the machine and is not assignable to
any third party.
6. If the purchaser hires out the machine to any third party the warranty shall apply only to matters notified to the Company
in writing within 90 days of the date of delivery and clause 1 shall be read as if the period of 90 days were substituted for
the period of 12 months.
7. The warranty will cease to apply if:
(a) any parts not made, supplied or approved in writing by the Company are fitted to the machine or
(b) any repair is carried out to the machine other than by or with the express written approval of the Company or
(c) any alterations not expressly authorized by the Company in writing are made to the machine or
(d) the machine is damaged by accident or
(e) the machine is abused or overloaded or used for a purpose or load beyond its design capabilities, or used in conjunction
with a tractor whose power output capability exceeds the stated implement power requirement by more than 40%. For the
purpose of these terms and conditions, “stated implement power requirement” refers to wheeled tractors unless specifically
stated. These power requirements should be reduced by 20% when used in conjunction with tracked tractors.
(f) the machine is operated as part of a ‘cultivation train’ where more than one implement is being towed, without the express
written approval of Simba International Ltd.
(g) any maintenance is not carried out in accordance with the service schedules in the operator’s manual.
(h) the Installation and Warranty Registration Certificate is not received by Simba International Ltd., Service Dept., Woodbridge
Road, Sleaford, Lincolnshire, England, NG34 7EW, within 7 days of installing a new machine.