Flylink Full HD H.264 WIFI - Инструкция (Страница 21)

- 21 -
WIFI Control
WIFI Mode - Orange LED
In default case, WIFI function is off. To activate it, press the
shutter button for 5s, then you will hear one buzz, the LCD
screen will display one fixed WIFI icon
and the orange LED
will flicker. In such case, it indicates the camera has entered the
WIFI mode. After WIFI is activated, press and hold the video key
for 5s to inactivate it.
After the WIFI mode of the camera is activated, operate
according to the following steps to connect a mobile phone and
the camera:
1. Install AP software to mobile phone; ispo cam .APK is specific
for Android while ispo cam.IPA for iphone;
2. Activate the WIFI function of the mobile phone;
3. Find the equipment name of the camera such as
“A5-A000001” from the available WIFI network;
4. The defaulted WIFI password of the camera is “1234567890”;
after the password is entered correctly, the mobile phone will
have point-to-point connection with the camera; after the
connection is successful, the orange LED of the camera will be
solid on.
5. Open the installed ispo software, then you can see the
view window of the camera from the screen of the mobile phone
and control the camera to record videos and take photos; in
addition, you can download from the internal memory cards of
the camera videos and photos to the internal memory of the
mobile phone, etc..
Note: The connection between the camera and the mobile phone
is the 1-to-1 relationship; after the camera is connected with one
mobile phone, you will be unable to connect any other mobile
phone any more. To connect another mobile phone, you have to
disconnect the mobile phone connected previously and make
sure the mobile phone support Android2.3, IOS and other
versions above.