Flylink Full HD G-sensor - Инструкция (Страница 7)

- 6 -
Appearance and Functional Description
1, MENU key、2，UP ( mic ON/OFF)、3，Video and Image key、 4，DOWN
(Emergency key),、5，Mode key、6，HDMI Port、7，TF card slot、、8，USB port、
9，Microphone、10，Reset key、11，On/Off key、12，Infrared lamp 、13，Speaker
14，Lens、15，Charge indicator (green) , Status indicator (red)、16，Screen、
Charge Battery
1.Directly to the car charger connected camera USB interface, the camera is
automatically turned on and charging, charging, charging indicator light go out
after full.
2. USB charging, USB data cable is connected to the computer and the other end
connected to one end of the camera, you can charge off state can be charged,
charging, charging indicator light turns off after full.
3. For the power capacity in the battery, refer to the following icons:
Full Middle Low
Installation and Removal of TF Card
1. In the direction as indicated, insert the TF card into the slot until it is held firmly.
2. To take the TF card out, slightly press the TF card to eject it out.
Note:
1. Observe the direction to insert the TF card; if the direction is reverse, the
device and the TF card may be damaged.
2. When the TF card is inserted into the device, the machine will set the TF card
as preset storage unit and the data in the original TF card will be unreadable.
3. If the TF card is incompatible with the device, please insert the card again or