Beko CM 68201 C RU - Инструкция (Страница 37)

P j P a r t 4 : O p e r a t i n g t h e t o p b u r n e r s
22 cn
26 cn
To obtain
maximum
efficiency
A correct use to burner
results in gas saving and
better out put. Therefore
we recommend to use
saucepans whose base
completeiy cover the
flames. Four saucepans
with much smailer
diameters to be put
auxliiary burner,use the
pan support adaptor.
if your cooker has fiame faiiure
device on gas burners;
In case of any fiame faliures
with any reasons in the top
burners, the flame failure device
immediately cuts of
the gas flow, it is aiso a safety device for the wrong
use of the chiidren. You should turn the knob to the
counter-clockwise direction by pressing. You should
ignite by pressing the knob and wait for its ignition
You shouid keep the knob at pressed position for 3-
5 seconds after you see the fiame around the burner.
Repeat the sequence of operations if the flame does
not continues.
Use of top gas burners
Turn the relevant knob by slightly
pressing in counter clockwise direction.
The large flame on the knob corresponds
to maximum capacity position and the
small flame corresponds to minimum
capacity position.
Ignition by button
In models with ignition;
It provides automatic ignition.
When the button is pressed and released all
plugs spark at the same time. The ignition starts
at the burner through which the gas flows. If
an ignition does not occur, repeat the same
action. Holding the button at pressed position
does not provide ignition.
Ignition from the knob
In models with ignition;
You should turn the knob to counter-cbckwise
direction by pressing. The spark occurs itself
immediately on the burners till you take your
hand off the knobs.
After you release the knob, if the ignition does
not continue repeat the same process by
keeping the knob pressed for 15 seconds. If
still no igniton occurs, wait for
1 minute
and repeat again.
Warning : Do not keep the knob
in pressed position more than
15 seconds.