Electrolux EDC3250 - Инструкция (Страница 5)

Description of the appliance
13. Connector for drain hose
There is a drain hose as an extra accessory for you
who want and can connect the tumble dryer directly
to a drain outlet. Fix the hose to the connector (13)
after releasing the hose clip and removing the plug.
When a drain hose is fitted, the water tank will not
be filled with water.
14. Water tank for condensed water
This fills up with the water condensed by the dryer
and should be emptied after each load. When the
tank is full, a warning light (D) will flashing and a
buzzer will sound. The dryer will stop automatically
and will not restart until the tank has been emptied.
If the dryer should stop on account of a full tank
during an automatic program and you fail to empty
the tank within 5 minutes, the program may not be
able to continue successfully. If this happens, the
current program will need to be cancelled and a
new one started. For this reason it is best always
to check that the tank is empty before starting to
dry a new load.
• Lights
(see also chapter ”The indicator lights”).
iiL A. Lit during drying stage.
A B. Lit during cool-down stage.
iG,o. Flash alternately during anticrease stage.
€■„ D. Flashes when water tank is full.
• Buttons
O E. Start button. After selecting program, press and
hold the start button intil one of the indicator
lights comes on (1-2 seconds).
F. Button for reduced heat for timed programs.
If this button is pressed, the drying heat will be
reduced and the load will dry at a lower temperature.
Suitable for especially delicate textiles.
• Program selector
G. For selecting electronic or timed drying programs
(see also chapter ”Program chart”).
• Cancel program
H. If the program selector is turned to this position
during a program, the program will be cancelled
and a different program can then be selected.
To start the new program, press the start button.
12
3 -
E -
B
A
G-
1-F
C
■hD
H
- 5 -