Sharp SJ-FS97VBK - Инструкция (Страница 24)

24
Energy Saving
Use this feature when you want to switch the appliance to
energy-saving operation.
To start operation
1 Select “Energy saving” icon.
(The icon is green.)
2
Select “ON”.
3
Finalize the setting.
Additionally the handle indicator (Green) will blink
3 times.
Handle indicator in operation
Every time you close the door, the indicator will flash •
(Green).
If Plasmacluster is also in operation, the indicator will flash •
6 times.
(Blue→Green→Blue→Green→Blue→Green)
To cancel operation
It is the same method as starting operation.
Select “OFF” in step 2.
NOTE
While this feature is operating, the inside temperature of the •
refrigerator and freezer compartment will be higher than the
preset temperature by about 1°C(refrigerator) and about
2°C(freezer). This is the guide under the condition of the
preset temperature 3°C(refrigerator) and -18°C(freezer). The
display of preset temperature will not be changed.
The efficiency of power saving depends on the usage •
environment (controlling temperature, ambient temperature,
frequency of opening or closing the door, amount of food).
Cancel this feature when you feel the beverages are not •
cooled enough or ice making takes time.
Tips for saving energy
Keep the ventilation space as much as possible around ■
the refrigerator.
Keep your refrigerator out of direct sunlight, and do not ■
place next to heat generating appliance.
Open your refrigerator door as briefly as possible. ■
Hot foods should be cooled before storing. ■
Place the food evenly on the shelves to allow the ■
cooling air to circulate efficiently.
The amount of power consumption of this model is
measured according to the international standard
of the refrigerator performance under the following
conditions.
All accessories in the freezer •
compartment are taken out as
indicated on the figure.
Space dimensions. •
300mm
90mm
300mm
60mm
Flashing
(B375).indb 24 2012/09/11 13:34:57