Yamaha DVD-S1800 - Инструкция (Страница 45)

41
En
TROUBLESHOOTING
Eng
lish
Problem Solution
See
page
No sound or distorted sound Adjust the volume on the TV or the AV receiver. –
Check that the speakers are connected properly. –
Adjust the volume level in the setup menu. 33
No audio at digital output Check the digital connections. 11
If you are playing a DTS source, check that your receiver can decode
DTS and [Digital Out] is set to [All]
.
31
If you are playing an MPEG-2 source, check that your receiver can
decode MPEG-2. Otherwise, make sure that [Digital Out] is set to
[PCM]. 31
Check that the audio format of the selected audio option on the disc
matches your receiver capabilities. –
No audio at HDMI output Make sure that [HDMI Audio] is set to [Auto] or [PCM]. 37
No audio signals via the HDMI jack are output if the DVI-D
component is connected to this unit using the HDMI-DVI converter
cable.
To output audio signals via the HDMI jack, connect an HDMI
component to this unit. 12
Disc does not play Check that the disc format is supported. 3, 44
The CD-R/RW, DVD+R/RW and DVD-R/RW must be finalized. –
Check that the disc label is facing up. 18
Check that the disc is defective by trying another disc. –
If you have recorded a JPEG, MP3 or WMA disc yourself, check that
your disc contains at least ten JPEG picture files or five MP3/WMA
music tracks. –
Check the region code of the DVD disc. 3
Picture freezes momentarily
during playback Check the disc for fingerprints/scratches and clean it with a soft cloth
wiping from the center to the edge. 4
This unit does not respond to
the remote control Aim the remote control directly at the remote control sensor on the
front panel. 15
Reduce the distance of the remote control from this unit. 15
Replace the batteries in the remote control. 15
Reinsert the batteries with their polarities (+/– signs) as indicated. 15
Buttons do not work Disconnect the power cable from the AC outlet for a few minutes.
Reconnect the power cable and try to operate again as usual. –
This unit does not respond to
some operating commands
during playback Operations may not be permitted by the disc. Refer to the instructions
of the disc jacket. –
Menu items cannot be selected Depending on the connection status or disc availability, some menu
items cannot be selected. –
Cannot play back SA-CD disc When [SA-CD mode] is set to [CD], this unit does not play back
SA-CD discs which does not have CD layer. 29
No sound during DivX ® movies
playback
The audio code may not be supported by this unit. –