Trouble check – Инструкция по эксплуатации Sony CCD-TR640E
Страница 93
93
Additional information /
Дополнительная информация
Trouble check
Symptom
Cause and/or Corrective Actions
• The START/STOP MODE switch is set to 5SEC or
.
m Set it to
. (p. 19)
• The battery is dead.
m Use a charged battery pack or the AC power adaptor. (p. 9,
32)
• Moisture condensation has occurred.
m Remove the cassette and leave the camcorder for at least 1
hour. (p. 85)
• You pressed DATE and TIME together for more than 2
seconds.
m The camcorder is not malfunctioning. You may start
recording. Flashing will stop soon.
• The lithium battery is weak or dead.
m Replace the lithium battery with a new one. (p. 74)
• The POWER switch is set to CAMERA or OFF.
m Set it to PLAYER.
• The tape has run out.
m Rewind the tape or use a new one. (p. 26)
• STEADYSHOT is set to OFF.
m Set STEADYSHOT to ON. (p. 62)
• The Steady Shot function does not work when the wide mode
is set to 16:9 FULL.
• FOCUS is set to MANUAL.
m Set it to AUTO. (p. 50)
• Shooting conditions are not suitable for autofocus.
m Set FOCUS to MANUAL to focus manually. (p. 50)
• The START/STOP MODE switch is set to 5SEC or
.
m Set it to
. (p. 19)
• A title is displayed.
m Stop superimposing the title. (p. 55)
• The stereo tape is played back with HiFi SOUND set to 1 or 2 in
the menu system.
m Set to STEREO in the menu system. (p. 34)
• The picture has been recorded with WIND set to ON in the
menu system.
m When there is no wind, set it to OFF. (p. 34)
• You are playing back a portion of tape on which you wrote or
erased the index signal. This is not a malfunction. (p. 72)
• Reset the date and time. (p. 76)
Recording stops in a few seconds.
The date or time indicator
disappears.
Data code becomes “--:--:--”.
(CCD-TR845E only)
Excessive high-pitched sound is
heard. (CCD-TR840E/TR845E only)
The fader function does not work.
(CCD-TR511E/TR640E/TR840E/
TR845E only)
The autofocusing function does not
work. (CCD-TR511E/TR640E/
TR840E/TR845E only)
The Steady Shot function does not
activate. (CCD-TR640E/TR840E/
TR845E only)
The tape does not move when a
video control button is pressed.
No sound or only a low sound is
heard when playing back a tape.
(CCD-TR840E/TR845E only)
The date or time indicator is flashing.
{
and 6 indicators flash and no
function except for cassette ejection
works.
The cassette cannot be removed from
the holder.
(to be continued)