Philips HR1874 - Инструкция (Страница 2)

English
introduction
Congratulations on your purchase and welcome to Philips! To fully benefit
from the support that Philips offers, register your product at
www.philips.com/welcome.
This appliance has been designed to maximise the juice output while
minimising the cleaning effort. It has been specifically developed to enable
you to process a broad variety of ingredients and a wide range of recipes
with confidence.
general description (Fig. 1)
1 Pusher
2 Feeding tube
3 Lid
4 Filter
5 Juice collector with spout
6 Pulp window
7 Integrated pulp container
8 Driving shaft
9 Locking arm
10 Motor unit
11 Control knob
12 Cord storage facility
13 Detachable spout
14 Spout accessory
15 Cone (HR1874 only)
16 Sieve (HR1874 only)
17 Sieve holder with spout (HR1874 only)
18 Gear box (HR1874 only)
19 Juice jug lid with integrated foam separator
20 Juice jug
important
Read this user manual carefully before you use the appliance and save it for
future reference.
Danger
- Do not immerse the motor unit in water or any other liquid, nor rinse
it under the tap.
- Do not clean the motor unit in the dishwasher.
Warning
- Check if the voltage indicated on the base of the appliance corresponds
to the local mains voltage before you connect the appliance.
- Do not use the appliance if the plug, the mains cord or other
components are damaged.
- If the mains cord is damaged, you must have it replaced by Philips, a
service centre authorised by Philips or similarly qualified persons in
order to avoid a hazard.
- This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for
their safety.
- Children should be supervised to ensure that they do not play with the
appliance.
- Never let the appliance operate unattended.
- If you detect cracks in the filter or if the filter is damaged in any way, do
not use the appliance anymore and contact the nearest Philips service
centre.
- Never reach into the feeding tube with your fingers or an object while
the appliance is running. Only use the pusher for this purpose.
- Do not touch the small cutting blades in the base of the filter. They are
very sharp.
- Always place and use the appliance on a dry, stable and level surface.
- To ensure that the appliance stands stably, keep the surface on which
the appliance stands and the bottom of the appliance clean.
Caution
- This appliance is intended for household use only.
- Do not hold the appliance by the locking arm when you carry it.
- Never use any accessories or parts from other manufacturers or that
Philips does not specifically recommend. If you use such accessories or
parts, your guarantee becomes invalid.
- Make sure all parts are correctly assembled before you switch on the
appliance.
- Only use the appliance when the locking arm is in locked position.
- Only lower the locking arm to unlocked position after you have
switched off the appliance and the filter has stopped rotating.
- Do not use the citrus press longer than 10 minutes without interruption
(HR1874 only).
- Never immerse the gear box in water nor rinse under the tap (HR1874
only).
- Never clean the gear box in the dishwasher (HR1874 only).
- Always unplug the appliance after use.
- Noise level: Lc = 78 dB(A).
safety feature
- This appliance is fitted with a safety feature which safeguards against
overheating due to excessive loads. In case of overheating, the
juicer automatically activates the overload protection and switches itself
off. If this occurs, set the control knob to 0, unplug the appliance and
let it cool down for 15 minutes. Remove the juice jug and detach the
lid, juice collector and the integrated pulp container and then press the
overload protection button on the bottom of the motor unit (Fig. 2).
Electromagnetic fields (EMF)
This Philips appliance complies with all standards regarding electromagnetic
fields (EMF). If handled properly and according to the instructions in this
user manual, the appliance is safe to use based on scientific evidence
available today.
Before first use
Thoroughly clean the parts that come into contact with food before you
use the appliance for the first time (see chapter ‘Cleaning and storage’).
Using the appliance
Juicer
Preparing the juicer for use
1 Make sure all detachable parts are clean (see chapter ‘Cleaning and
storage’).
2 Unwind the mains cord from the base of the motor unit (Fig. 3).
3 Assemble the integrated pulp container onto motor unit (Fig. 4).
4 Assemble the juice collector onto the integrated pulp
container (Fig. 5).
5 Assemble the filter onto the driving shaft of the motor unit. Make
sure the filter is fitted securely onto the driving shaft (‘click’) (Fig. 6).
6 Assemble the lid onto the juicer (Fig. 7).
7 Lift the locking arm to locked position (‘click’) (Fig. 8).
8 Place the lid on the juice jug to avoid spattering (Fig. 9).
Note: The integrated foam separator ensures clear juice as an end result.
9 Place the juice jug under the spout (Fig. 10).
Note: If you want to extract juice straight into a glass, use the spout
accessory (Fig. 11).
Using the juicer
The appliance only functions if all parts are assembled correctly and the
locking arm is in locked position.
1 Wash the fruit and/or vegetables and, if necessary, cut them into
pieces that fit into the feeding tube.
2 Make sure the juice jug is placed directly under the spout (Fig. 10).
Note: If you want to extract juice straight into a glass, use the spout accessory.
3 Turn the control knob to setting 1 (low speed) or 2 (normal speed)
to switch on the appliance (Fig. 12).
Note: For hard fruits or vegetables (e.g. apples, beetroots and carrots) we advise
you to use speed 2 (normal speed). For soft fruits or vegetables (e.g. berries,
kiwi, grapes, tomatoes, cucumber and melon) we advise you to use speed 1 (low
speed).
4 Put the pieces in the feeding tube and gently press them down
towards the rotating filter with the pusher (Fig. 13).
Do not exert too much pressure on the pusher, as this could affect the
quality of the end result. It could even cause the filter to come to a halt.
Never insert your fingers or an object into the feeding tube.
5 Align the groove of the pusher with the small protrusion on the
inside of the feeding tube and slide the pusher into the feeding
tube (Fig. 13).
6 When you have processed all ingredients or when the integrated pulp
container is full, switch off the appliance and unplug it. Wait until the
filter stops rotating.