Panasonic AW-RP655 - Инструкция (Страница 49)

6 (E)
ENGLISH
Parts and their functions
 ABC button
This is used to automatically adjust camera’s black
balance in the pan/tilt head system currently selected.
Set the IRIS [AUTO/MANU/LOCK] button to AUTO (the
IRIS button is now lit), and press the ABC button.
While the black balance is being adjusted, the ABC
button’s lamp flashes; when it has been adjusted properly,
it goes off. It comes on when it was not possible to
perform the adjustment.
If a pan/tilt head AW-PH300/AW-PH300A/AW-PH500/
AW-PH600 is being used, the ABC button’s lamp also
goes off if the black balance was not adjusted properly.
 LCD panel
This displays the statuses of the current settings.
 CAMERA CONTROL lamp
This comes on when communication with the camera
in the currently selected pan/tilt head system has been
established properly. It goes off when there is a problem
with the communication.
This lamp will remain off even when there is a normal
signal when using AW-PH300/AW-PH300A/AW-PH500/
AW-PH600 for the pan/tilt head.
 Menu setting control (L)
This is used to change the item or the value of the item
displayed on the left at the bottom of the LCD panel in the
setting menu mode.
 Menu setting control (R)
This is used to change the item or the value of the item
displayed on the right at the bottom of the LCD panel in
the setting menu mode.
 Menu setting control (main)
This is used to select the item or change the value of the
item displayed at the top of the LCD panel in the setting
menu mode.
 R/B GAIN/PED button
Press this button to adjust the camera’s R/B gain or R/B
pedestal in the pan/tilt head system currently selected.
Each time it is pressed, the adjustment mode is set to ON
or OFF in turn.
When the adjustment mode is set to ON, the button’s
lamp comes on; when it is OFF, the lamp goes off.
 MENU button
This is used to select ON or OFF for the setting menu
mode of the pan/tilt head system currently selected.
Each time it is pressed, the menu mode is set to ON or
OFF in turn.
When the setting menu mode is set to ON, the button’s
lamp comes on, and the setting menu appears on the
LCD panel. In this status, the MENU button is used to
select the setting menu items as well.
When the setting menu mode is set to OFF, the button’s
lamp goes off, and the LCD panel returns to its original
display.

LCD CONTRAST control
This is used to adjust the contrast of the LCD panel.

BUZZER LEVEL control
Adjusts the BUZZER volume level when the CALL button
is pressed.
 OK button
This is pressed to select setting menu items or to enter
the values of items.
It is possible to switch the speed at which the setting value
of some of the items in the setting menu changes each
time jog dial ,  or  is pressed.
(See pages 33 to 36)