Panasonic AW-RP655 - Инструкция (Страница 85)

42 (E)
ENGLISH
Power supply: DC 10.8 V to DC 16 V
Power consumption: 9.0 W
General
Ambient operating temperature
–10°C to +50°C
Storage temperature
–20°C to +60°C
Ambient operating humidity
30% to 90% (no condensation)
Weight
3.5 kg
Dimensions (WHD)
42052220 mm
Finish
AV ivory paint (colour resembling Munsell 7.9Y 6.8/0.8)
Pan/tilt heads supported
AW-PH300, AW-PH300A, AW-PH350, AW-PH360,
AW-PH500, AW-PH600, AW-PH650
Cameras supported
AW-E300, AW-E300A, AW-E600, AW-E800, AW-E800A,
AW-E350, AW-E650, AW-E655, AW-E750, AW-E860
Input connectors
DC 12V IN socket
XLR, 4-pin
GND
Connect this to ground for use.
Output connectors
MONITOR SELECT connector
RJ45
Connecting cable:
10BASE-T straight cables (UTP category 5),
max. 50 meters
Input/Output connectors
TO CONTROL PANEL [IN/OUT] connectors
RJ45 (1 each)
Connecting cable:
10BASE-T straight cables (UTP category 5),
max. 1,000 meters
When more than one additional panel is to be connected,
make sure that the total length of all the cables does not
exceed 1,000 meters.
TALLY/INCOM
D-SUB, 15-pin
REMOTE/SERVICE
RS-232C
TO PAN/TILT HEAD [1/EXT, 2 to 5] connectors
RJ45 5, control signal output for pan/tilt heads
Connecting cable:
10BASE-T straight cables (UTP category 5),
max. 1,000 meters
INCOM
XLR, 4-pin
Other
TERMINATION switch
Termination setting for communication line with control
panel
ID switch
Operations mode (MAIN, 1, 2) setting.
REMOTE/SERVICE switch
Maintenance switch. Set in the “N” position during use.
Weight and dimensions shown are approximate.
Specifications are subject to change without notice.
Specifications
indicates safety information.