Hints and tips, 3 change a programme, 4 at the end of the programme – Инструкция по эксплуатации Electrolux EDC2086PDW

Страница 10: 5 auto stand-by function, 1 preparing the laundry

Advertising
background image

7.3 Change a programme

1. Press the on/off button to deactivate

appliance

2. Press the on/off button to activate the

appliance.

3. Set the programme.

7.4 At the end of the
programme

When the programme is completed,
• An intermittent acoustic signal oper-

ates.

• The indicator flashes.
• The indicator

comes on.

• The Start/Pause indicator is on.
The appliance continues to operate with
the crease guard phase for approximately
other 30 minutes.
The crease guard phase removes creases
from your laundry.
You can remove the laundry before the
crease guard phase is completed. We
recommend, for better results, that you
remove the laundry when the phase is al-
most completed or completed.

When the crease guard phase is comple-
ted:
• The indicator is on but does not flash.
• The indicator

goes off.

• Start/Pause indicator goes off.
1. Press the on/off button to deactivate

the appliance.

2. Open the appliance door.
3. Remove the laundry.
4. Close the appliance door.

Always clean the filter and empty
the water container when a pro-
gramme is completed.

7.5 Auto STAND-BY function

To decrease the energy consumption, this
function automatically deactivates the ap-
pliance:
• After 5 minutes if you do not start the

programme.

• After 5 minutes from the end of the pro-

gramme.

8. HINTS AND TIPS

8.1 Preparing the laundry

• Close the zippers.
• Close the fasteners of the duvet covers.
• Do not keep ties or ribbons loose (e.g.

apron ribbons). Tie them before you
start a programme.

• Remove all items from the pockets.
• If an item has the internal layer made of

cotton, turn it inside out. Make sure that
the cotton layer is always external.

• We recommend that you set the cor-

rect programme applicable for the type
of fabrics that are in the appliance.

• Do not put fabrics with strong colours

together with fabrics with light colours.
Strong colours can bleed.

• Use an applicable programme for cot-

ton jersey and knitwear to prevent the
items to shrink.

• Make sure that the laundry weight is

not more than the maximum weight
that is in the programme table.

• Dry only the laundry that is applicable

for tumble dryer. Refer to the fabric la-
bel on the items.

Fabric
label

Description

Laundry that is applicable for tumble dryer.

Laundry that is applicable for tumble dryer. Set the programme with
standard temperature.

10 www.electrolux.com

Advertising