Technical data, 2 if the drying results are not satisfactory – Инструкция по эксплуатации Electrolux EDC2086PDW
Страница 14
Problem
Possible solution
Make sure that the options are applicable
to the programme.
The display shows E51)
Deactivate and activate the appliance.
Start a new programme. If the problem oc-
curs again, contact the Service.
1) After maximum 5 hours, the programme ends automatically
10.2 If the drying results are not
satisfactory
• The set programme was incorrect.
• The filter is clogged.
• The condenser is clogged.
• There was too much laundry in the ap-
pliance.
• The drum is dirty.
• Incorrect setting of the conductivity
sensor.
• The airflow slots are clogged.
11. TECHNICAL DATA
Dimensions (mm)
Width / Height / Depth
600 / 850 – 865 / 600
Max. depth
(with the appliance door open)
1090 mm
Max. width
(with the appliance door open)
950 mm
Electrical connection
Voltage
230 V
Frequency
50 Hz
Fuse
16 A
Total power
2800 W
Drum volume
108 l
Weight of the appliance
43,5 kg
Laundry: max. weight
9 kg
Type of use
Household
Ambient temperature
Min.
5 °C
Max.
35 °C
Energy consumption
1)
kWh/cycle
5,05 kWh
Annual energy consumption
2)
267 kWh
Energy efficiency class
B
Power consumption
Left-on mode
0,48 W
Off-mode
0,48 W
1) With reference to EN 61121. 9 kg of cotton and a spin speed at 1000 rpm.
2) This is the approximate energy consumption for the 4 persons who correctly use the
appliance.
14 www.electrolux.com