Beko CS 58000 - Инструкция (Страница 65)

A Pari 9:
Gas sonvertion
Your cooker can operate both
Natural Gas and LPG. You can
convert by changing the gas
source and the top burner, oven
and grill i n j e c t o r s . T h e
replacement procedure of the
injectors are explained below.
Call authorized Servire for
gas sonvertion,
Replazement of the
top burner injestor
Take off the burner head
and burner cap before
starting this procedure.
Then:
7. Remove the injector
inside the top burner with
a suitable bit. Later, install
the new injector by covering
the injector threads
with leakage
preventing
material. Flame failure
device
Reduced Tap Flow
I »Ignite the burner that should be adjusted,
turn the knob to the reduced position, pull
and take the knob off.
R» With a screwdriver, make the tap
reduced flow adjustment from the injector
that is on the gas tap (only the head is
visible with the bolt shape).
It is sufficient to tight to screw
completely, in butane/propane gas.
For the natural gas, you should turn the
screw counter-clockwise
once. The normal length of a straight
flame in the reduced position
hould be 6 - 7mm.
If the flame is higher than the desired
position, turn the screw clockwise. If its
smaller to the opposite.
For the last control of the burning of the
cooker, bring the cooker high-flame and
reduced positions and check whether the
flame is on or off.
■I
31